|
LED
6070 Vacuum UV Exposure Unit
|
|
This vacuum UV exposure
unit mainly used for exposure precise screens; the external pump is
connected with main engine; it will make the screens and transparency
film close on the glass tightly by evacuating the air of the vacuum
charmer; exposure quality is high, especially for precise screens.
|
|
There are twelve LED
special UV light tubes.
The exposing area is 24*26 in.
The machine adopts timer to set the
exposing time; the timer have automatic memory function, set in once,
whether the number of switch turn on or off, time will save.
|
|
|
|
The functions
and features of this machine:
|
|
* There are twelve LED UV
light tubes,it can normally be used for about 10,000 hours.
|
|
* The exposing area is
24*26in,and it is suitable for exposing different size screen frames
within outsize 22*24in
|
|
* The rubber cloth and
seal ring adopts Taiwan produces high quality materials; Good stretch
elasticity, sealed well.
*
External high speed vacuum pump; Vibration is small; noise is small;
vacuum degree is 5Pa;it can work for 24 hours.
* Equipped with 8mm Tempered glass
plate, resistant to friction; the glass is broken, the glass shards are
no sharp, to ensure the safety of operator.
* The timer can set the exposing time,
after reach the exposing time, the machine automatically turns off the
tubes.
* The timer have automatic memory
function, set in once, whether the number of switch turn on or off, time
will save.
* Set the release valve, after the
exposure and open the release valve, remove the vacuum, open the cover
and remove the screen.
* This machine is equipped
with four soft plastic pad feet, place on the corner of frame, during
the vacuum, prevent the corner of frame damage the rubber cloth.
|
|
Special note:
|
|
Different brand of
emulsion have different exposing time, the operator need to use the
emulsion in this machine and confirm the best exposing time.
|
|
Methods of using
the timer
|
|
1. Before using, please press the "C"
button to reset, the display shows 00:00 00 and it is flashing state.
2. Press the "hour" and "minute" and
"second" button separately to set the countdown of the electrify time,
the display shows "ON".
3. Press the "start/pause" button to
start the countdown.
For example: set exposure time 5
minutes 30 seconds : At first press the "C" button to remove the
original set ; Then press "minute" set to"5"; press "seconds" set to
"30"; Then press the "start/pause" to start the countdown, l amp open;
After five minute 30 seconds countdown , plate burning machine tube
closed.
This setting do not need to
change, it is automatically saved. When the machine starts again, the
countdown is still 5 minutes and 30 seconds.
|
|
Basic parameters of
the timer: Countdown: 1 SEC - 99 hours 59 minutes and 59 seconds
Working temperature: - 25 c - 65 c
|
|
Note:
Pump to add engine oil before used
only, lest cause motor damage. No oil can not be used Periodic
inspection is required.
|
|
|
|
|
Using steps of
the machine:
1.Connect the
vacuum pump pipe with the exhaust pipe.
2.Plug the vacuum pump power into the
socket.
3.Turn on the machine, adjust the
Settings of exposure time.
4.Put the film and plate on the glass
and adjust the position.
5.Put the four sledge foots on the four
corners of the screen frame.
6.Close the cover, fit the hook locked;
Vacuum pump starts exposing at the same time.
7.After 5 minutes of exposing ,the
rubber cloth is closely fit with the mesh in the screen frame.
8.Press the timer “start/pause” button
to expose.
9.When the exposing time is over, the
tubes will be off automatically ;open the exhaust valve, the exposure
will be disappear.
10.Turn off the power of the machine,
and take out the screen frame. The exposure is finished .
|
|
Product color
|
Blue
|
Machine surface treatment
|
Electrostatic
spraying
|
|
Machine using material
|
Steel plate
|
Attachment material
|
Stainless steel
or zinc plating, nickel plating
|
|
Voltage
|
110V
|
Machine size
|
31.5*28.3*9.4
inch
|
|
Packing material
|
Wooden case
|
Exposure size
|
24*26 in
|
|
Net weight
|
117lb
|
Gross weight
|
128lb
|
|
|
Item Included：
LED 6070 Vacuum UV Exposure Unit 219108
|
