2. The wheels must be centered with the V-shaped guide grooves.

3. Check if the external power supply is grounded. If there is no grounding measure, the equipment must not be used.

4. The main power supply line should be 4 square millimeters or larger.

5. Ensure that the equipment plug is tightly connected to the socket.

6. After turning on the power key switch, check the position of the speed control knob pointer. Only when the pointer is at zero can the system start button be pressed.

7. When starting the operation, the speed control switch must be turned slowly and steadily until the vibration table moves up and down reciprocally.

8. If the speed needs to be changed for observation, the speed control switch must be turned steadily to ensure a smooth change in the vibration table's movement frequency.

9. After using the equipment, use the speed control switch to slowly stop the vibration table, and then press the stop button.

10. The linear bearing must be lubricated before each use.

2. Versatile and User-Friendly Operation
Featuring preset vibration modes and customizable frequency/amplitude via an industrial touch screen, allowing technicians of all skill levels to start diagnostics with minimal training and easily meeting the diagnosis requirements of different vehicle types and faults.

3. Robust and Durable Construction
Crafted with heavy-duty high-strength materials, withstanding daily workshop use at the max. lifting capacity of 3000kg (6600lb); adopting industrial-grade driving components, achieving the long service life with low maintenance cost.

4. All-dimensional Safety Protection
Equipped with the emergency stop switch, universal wheels, support feet and other safety devices, conforming to the safety management standard, greatly reducing the operation risk and ensuring the safety of personnel and equipment.

5. No Weather/Site Restrictions
No need for on-road testing, working normally on rainy days and at night, avoiding traffic accidents and traffic violation risks during road tests, also greatly shortening the vehicle diagnosis time, improving the workshop space utilization and customer satisfaction.

Control Panel

The control panel integrates the touch screen and mechanical switches, achieving manual/automatic mode selection and parameter setting, meeting different detection requirements of different vehicles and improving the detection precision and reliability.
　

Tire Holder

The tire holder adopts the rotatable design and V-shaped groove structure, stably and adaptively supporting the corresponding tire, simulating the actual road conditions in the driving process, optimizing the detection angle and facilitating inspection of faults and abnormal noise.
　

Supporting Unit

The universal wheels and adjustable supporting legs are combined to stably support the machine body and facilitate movement and fixing as needed, preventing the machine body from accidental movement during operation and improving the movement convenience and fixing stability.
　

Handles

Two black handles are designed for easily pushing and pulling the machine body as required, meeting the ergonomic standard, saving labor and improving the practicability. The handles are firm, durable, convenient to use and easy to clean and replace.
　

Stress Relief Tools

The stress relief tools are made of aviation aluminum materials, have good oxidation resistance and high structural strength, are not prone to deformation or cracking and greatly enhance the controllability and stability.
　

Workpiece Trays

Two trays are designed for holding and storing different workpieces and tools, protecting the workpieces and tools from loss and damage, keeping the working environment clean and neatly and enhance the user experience.
　

2. Place the two main vibration stands and two safety stands under the corresponding wheels.

3. Slowly lower the vehicle until the four tires are centered in the V-shaped grooves of the front and rear stands.

4. After aligning the tires with the V-shaped grooves, tighten the height-adjustment feet of the stands. Raise the equipment’s casters off the ground by 5mm, and then lock the support feet nuts.

5. Continue to lower the lift until the lift tray is 50mm away from the vehicle’s underside.

6. Connect the external power supply, and then turn on the machine to start the equipment operation.

7. Select the manual/automatic test and road condition modes on the touch screen as needed.

8. After completing the test, turn off the external power supply.

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.