|
|
 |
|
Desktop
Vertical Pneumatic Injection Molding Machine Laboratory Plastic
Injection Molding Machine 110V |
|
|
|
|
|
|
 |
|
Product
Overview |
| The vertical injection molding
machine is a small pneumatic injection molding device
specifically designed for laboratories, research and development
departments and so on. The machine has the functions of
temperature and pressure control, single injection molding and
pneumatic driving, and has the advantages of effective
adjustment of temperature and pressure, precision filling and
injection molding, high molding speed and stability, low labor
intensity and high applicability. The machine can be applied to
injection molding of different materials, such as ABS, PP, PE,
PVC and PA, and is an ideal choice for scientific research and
small-batch production. |
|
|
Product
Parameters |
|
Supply voltage |
110V |
|
Power |
1kw |
|
Applicable plastic particles (material) |
ABS, PP, PE, PVC, PA |
|
Air pressure requirement |
0.6Mp-0.8Mp |
|
Heating temperature |
0-350˚C, adjustable |
|
Single theoretical maximum injection quantity |
0-15g (0-0.53oz) |
|
Plunger diameter |
16mm |
|
Inner diameter of nozzle |
2.5mm |
|
Plastic injection mode |
(Electric switch) single injection |
|
Injection speed |
1cm/s |
|
Maximum mold size (L*W*H) |
20*20*8cm (7.9*7.9*3.1 inches) |
|
Machine size |
30*20*84cm (11.8*7.9*33 inches) |
|
Net weight |
25kg (55.1LBS) |
|
 |
|
Attention |
|
1. Before
operating the machine, check whether the mechanical and
electrical parts are damaged, whether the machine frame part is
obviously deformed, and whether the air line of the air cylinder
is damaged or loose.
2. The machine
needs to be connected to the driving air source after being
received. The accessories include a 10mm air line and a straight
insertion connector for easy connection to the air compressor
(the silent 30l small air compressor needs to be prepared in
advance.).
3. The air
pressure requirement is between 0.65-0.85. The air pressure
lower than the standard air pressure can cause defects in the
injection molded product, while the air pressure higher than the
standard air pressure is prone to danger.
4. The machine
power supply needs to be properly grounded, and the grounding
resistance should not exceed 5om. It is strictly prohibited to
modify the pneumatic part of the machine power supply. The power
supply should be 110V single-phase power supply. |
|
|
Product
Features |
 |
|
|
| The
heating temperature can be freely adjusted within the range of
0-350˚C through the temperature controller according to the
melting temperature of the material, the actual temperature can
be clearly displayed and monitored in real time, the operation
is easy and convenient, and the practicability is high. |
|
The pressure gauge
can directly display and monitor the current air pressure in
real time, ensuring the air source is in a good condition. The
air pressure stability can be effectively guaranteed, and the
fault can be timely found and solved. The pressure gauge has
high compatibility and anti-interference performance. |
|
|
|
| The
electromagnetic valve is effectively controlled in a pneumatic
mode, can make a quick response and has high control precision.
It is compact in structure, high in integration level, low in
power consumption and long in service life. |
|
The injection
molding machine is connected to the 110V power supply reliably
and firmly. The circuits are arranged reasonably and orderly,
the appearance is attractive and elegant, and the safety
protection is well achieved. |
|
|
|
| The
conical plunger barrel facilitates filling of raw materials and
can cooperate with the Φ16mm plunger perfectly to achieve stable
pushing operation. The plunger barrel is simple in structure and
low in maintenance cost and can achieve quick cleaning and
material change. |
|
The injection
nozzle with the internal diameter of 2.5mm can achieve quick and
perfect injection molding at the speed of 1cm/s, and has the
high sealing performer and adaptability. The materials can be
prevented from adhering to the injection nozzle, ensuring
precision injection molding. |
|
|
Operation
Method |
|
1: Filling of
injection molding raw materials
It is best to fill
no more than 80% of the plunger cylinder with raw materials at a
time. Excessive filling can cause problems that the plunger and
material barrel are jammed, the upper and lower portions are
adhere to each other.
2: Adjustment of
heating temperature
The operator
directly face the temperature controller at the upper right
corner of the machine, and the button switch is selected to turn
on/off the heating system. The temperature controller set button
is used to set the temperature, and the up and down arrows are
used to adjust the temperature to the desired temperature range
for processing plastic. The PE and PP temperature is 200-240˚C,
The ABS temperature is 180-210˚C,
and the PS temperature is 180-200˚C.
Adjust the temperature to the appropriate range according to the
melting temperature of the materials.
3: Adjustment of
injection pressure
The pressure gauge
of the pressure regulator on the upper right side of the machine
displays the current working pressure. Lift the black knob,
rotate it clockwise to increase the pressure, and rotate it
counterclockwise to decrease the pressure (the pressure will not
change immediately after adjustment and will only change after
the machine works once). Adjust the temperature and air pressure
appropriately according to the fluidity of the plastic.
4: Adjustment of
mold position
Firstly, adjust the height of the mold. It is best to keep the
distance between the mold gate and the machine nozzle to be
about 5mm. If the height is too large (the distance is greater
than 10mm), plastic is prone to leakage. After aligning the gate
and nozzle, press the foot switch to complete the injection
molding and then release the switch. Wait for the mold to cool
down, and then open the mold. The factory air pressure
adjustment is generally 0.2mp. If the injection molding is
incomplete or defective, please adjust the air pressure to a
reasonable range. The adjusting range is 0.2m-0.75mp. The higher
the air pressure is, the higher the injection pressure is. |
|
|
Product
Display |
 |
 |
 |
 |
|
Item Number (057248): 1 x
Desktop Vertical Pneumatic Injection Molding Machine 110V |
|
|
You can make
order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost. |
|
