|
|
 |
|
Electric Hydraulic Multifunctional 3-in-1 Angle Iron Processing Machine
Punching/Chamfering/Cutting Machine 110V |
|
|
|
|
|
|
 |
|
Product
Overview |
| The multifunctional angle iron
processing machine is an efficient and professional processing
device integrating three key functions of punching, chamfering
and cutting. The motor drives the pump to provide
power to quickly and accurately process the angle iron. The
3-in-1 structural design greatly saves the occupied space,
reduces the purchase cost and remarkably improves the working
efficiency. The processing machine is particularly suitable for
steel structure processing, electricity iron tower and
communication tower manufacturing, building decoration, repair
workshops and other occasions needing frequent processing of
angle iron. |
|
|
Product
Parameters |
|
Name |
Angle iron processing machine |
|
Model |
HHM-75 |
|
Chamfering ability |
Iron plate below 6mm / 0.23'' |
|
Cutting capacity |
Iron plate 3-8mm / 0.11''-0.31'' |
|
Punching capacity |
Iron plate below 6mm / 0.23'' |
|
Power of motor |
1500W |
|
Input voltage |
110V |
|
Oil filling requirement |
The product needs to be filled with 15# anti-wear
hydraulic oil, and the refueling amount is about 30L. |
| Machine Size |
61*63*128cm / 24''*24.8''*50.4'' |
| Net weight |
145kg (319.6LBs) |
|
|
Name |
Punching machine |
Chamfering machine |
Cutting machine |
|
Model |
HHM-60 |
DJ-55 |
HHJG-75 |
|
Punching ability |
Angle iron 4-8# |
/ |
/ |
|
Bevel angle range |
/ |
Angle iron below 5# |
/ |
|
Oblique fillet range |
/ |
Angle iron below 6.3# |
/ |
|
Cutting capacity |
/ |
/ |
75*75mm / 2.95''*2.95'' |
|
Output |
31 tons |
16 tons |
20 tons |
|
 |
|
Attention |
| 1. The voltage of this
product is 110V, please use the corresponding voltage, and do
not use it wrongly to avoid burning the motor.
2. The adjusting switch in the
electric box has been debugged before leaving the factory. Do
not adjust it at will to affect the use.
3. Other equipment, except
punching machine, is not allowed to be used with no load.
4. The oil (#15 hydraulic oil)
to be used in the electric pump should be replaced every three
months.
5. Clean the machine after use
and brush it with anti-rust oil. |
|
|
Product
Features |
|
|
|
Punching Machine
The
punching machine has the high punching capacity and high
punching efficiency, the hole shape is regular and accurate, no
burr is generated, the positioning accuracy and consistency are
excellent, and the noise and vibration are relatively low. |
|
Cutting Machine
The
cutting machine can cut off the angle iron quickly and
efficiently through one-time cutting operation, operation is
easy and convenient, time and labor are greatly saved, the labor
intensity is well reduced, and the machine is stable and
durable. |
|
Chamfering
Machine
The
chamfering machine can be controlled to form bevel angles and
fillets on the angle iron, the chamfering efficiency and quality
are greatly improved, the secondary machining error is
effectively reduced, and the workload is lower. |
|
|
|
|
Control Panel
The control switches and the indicator lamp
are integrated on the control panel, the structure is simple and
compact, the machine is easy to start and stop, and automatic
processing is well achieved.
|
|
Foot Pedal
The foot pedal is designed for liberating
double hands, thereby greatly improving the operating safety. It
meets the ergonomic requirement, reduces the labor intensity and
can adapt to different operation occasions. |
|
Pressure Gauge
The
pressure gauge can clearly display the pressure during use,
facilitating real-time monitoring of the system conditions,
ensuring the safety of the machine and operator and avoiding
overload damage. |
|
|
|
|
Control Valves
The high-quality control valves are used for
controlling the punching machine, cutting machine and chamfering
machine correspondingly. The control valve is easy to open and
close, good in control effect and low in fault rate. |
|
Motor
The
high-performance driving motor can provide stable driving force
for different operations during use. The motor achieves powerful
and stable power output, high working efficiency, stable
operation and quick response. |
|
Moving Wheels
The
moving wheels are designed for achieving convenient movement of
the machine. The machine can better adapt to different working
environments, the working process is optimized, and the working
efficiency is improved. |
|
|
Operation
Method |
| 1．Move the machine to
the workplace and open the switch of the pulley at the
bottom of the machine.
2．Fill the oil to the
electric pump.
3．Confirm the control
valve handles of the HHJG-75, DJ-55 and HHM-60 in the
oil return state.
4．Push the green switch
after the pump is connected with the power supply.
5．Before use the tool,
press the machine with no material inside to exhaust the
air of the tank and hose.
6．Control the handles to
the corresponding tools when using the machine, and
rotate the handles to the oil return state after use.
7．The handle should be in
the oil return state when not using the machine, and
push the red switch to cut off the power. After copper
and aluminum bar processing, the electric pump must be
timely relieved to avoid man-made damage. |
|
|
|
Product
Display |
 |
 |
 |
 |
|
Item Number (057191): 1 x
Angle Iron Processing Machine 110V |
|
|
You can make
order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost. |
|
