Lab Equipment> Dental Equipment>
057155:Portable Strong Saliva Wet Vacuum Pump Machine Dental Suction Unit For Chairs
Unit:
set
Price:
C $1,685.00
Weight:
39.00kg
QTY:
Out Of Stock
     

Similar products

056361:Dental vacuum plaster mixer

056462:Oscillating electrolytic polishing machine

056497:Intelligent AGAR Mixer Melting, heating and mixing machine (110V 5-11kg)

056580:Bench double position polishing machine

160545:Dental Lab Dust Collector Vacuum Cleaner

Product Overview

110V Dental Negative Pressure Suction Pump Vacuum Pump Suction System for 2-3 Dental Chair

Product Overview
The dental electric suction machine utilizes electric drive and negative pressure generation to efficiently remove fluids and debris from the oral cavity, maintaining a clean surgical area, preventing infections, and enhancing patient comfort and treatment efficiency. It is suitable for various scenarios such as routine dental treatments, oral surgical procedures, restorative and orthodontic treatments, and pediatric dentistry.
Product Parameters
Voltage: AC110V
Power: 600W
Speed: 2900RPM
Air flow: 480L/min
Max. Vacuum: -22Kpa
Noise: 65dB(A)
Material: Motor: Cast aluminum
Shell: Iron plate
Separator: Nylon
Vacuum regulated: 300L/min
Air Intake Diameter: 1.4"(35mm)
Air Outlet Diameter: 1.4"(35mm)
Drainage Diameter: 0.8"(20mm)
Package size: 21.6"*21.2"*30.7" (55cm*54cm*78cm)
Net weight/Gross weight: 66LB(30kg)/86LB(39kg)

Please note: This is a portable dental suction unit for 2-3 dental chair.

Product Features & Advantages
External Filter System

The inhaled substances are filtered to prevent contamination and clogging. Easy to pull out the filter screen and cleaning.

Carrying Handle

This unit features built-in carrying handles on both sides, making it easy to move and place anywhere, saving worry and effort.

Electric Drive

Generates negative pressure through a motor to enable suction functionality. It has the characteristics of high efficiency suction, stable operation and low noise.

Easy Operation

The one-key start function simplifies device operation, allowing medical staff to quickly turn on the device and save time.

Supporting Leg

Four rubber supporting legs at the bottom, which are non-slip, wear-resistant, good silence, can ensure the stability of the machine.

Heat dissipation holes

Through the heat dissipation holes, the internal heat of the machine can be promptly dissipated, reducing the internal temperature of the machine and extending its usage time.

- Larger size: This is a portable dental suction unit for 2-3 dental chair.

- High Efficiency Suction: Capable of rapidly removing saliva, blood, and debris from the oral cavity, keeping the working area clean.

- Prompt Reaction: Suction power up to the highest level in 10 seconds.

- Low Noise Design: Noise level lower than 52 dB, ensure quiet working environment.

- Easy to Clean and Maintain: Simple structural design facilitates daily cleaning and maintenance.

- Durable Construction: Made with high-quality materials to ensure long-term stable operation.

Product Usage Instructions & Precautions
Precautions:

1. Pollutants that may accumulate during filtration in the filter basket.

2. Clean and disinfect the equipment before carrying out any repair work.

3. Clean and disinfect the equipment before transporting.

4. Disconnect and close all input and output connection before transporting.

5. During operation, the motor surface will get very hot,Do not touch the motor during operation.

6. Short circuit due to defective electrical connection,Check electrical connection.

Usage Instructions::

2. The installation room should not be used for another purpose. (e.g. Storage room).

3. When in need of installing the suction system in a cabinet, there must be an inlet and outlet ventilation slots on the ca binet.

4. Forced ventilation must be provided if there is a risk that the recommended room air temperature exceeds 40°C while the suction system is in operation.

Product Presentation & Detailss
Item Included(057155)
Dental Negative Pressure Suction Pump *1 Accessory Kit *1

You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.

无标题文档

About Us Product Service Shipping Payment Privacy refund Warranty

Copyright ASC365.com All Rights Reserved