Parameter:
Material: aluminum alloy and acrylic
Power: 80W
Voltage: 24VDC
Speed: 0-8000 r / min, 7-gread speed(by voltage)
Size: 355* 60 * 85mm
The theoretical maximum turning diameter: 70mm
The theoretical maximum clamping length: 180mm
Chuck clamping range: 0.6-6mm

Power：
Input:AC110V- 240V~50/60Hz 1.5a max
Output:12/15/16/18/19v 4.5A max
20/24v 4A max
Overall length:1.1m+1.1m

High-precision, stability, low noise;
Designed for the home DIY enthusiasts, csmall and portable, strong power;
Transparent plexiglass shield, super convection cooling holes;
Large torque ball bearing motor.

1.If the user does not have lathe base experience, when used, should follow: low speed, slowly, cautiously and other security operations.
2.The speed can be adjusted in 0-8000R, cut wood should not exceed 4000, grinding can use higher speed.
3.Drill chuck axis, the axis of the wood, the tailstock center axis of the drill should be in a straight line, or need to adjust the nut.
4.If not a cylinder, the speed should be reduced.
5.Tailstock bearing without lock tight.
6. When using a knife, locking the bottom of screw, location should be away from timber 1-1.5cm.
7.If you do not really understand the operation, it is best to consult a professional person.