|
|
新建网页 2
新建网页 1
新建网页 1
新建网页 1
|
DBD750-D1Electric
Hydraulic Pump |
|
Type |
DBD750-D1 |
|
Item |
|
Rated working pressure |
High pressure 70Mpa |
Low pressure 7Mpa |
|
Flow |
Hypertension 1L/ min |
Low-5L/min |
|
Motor power |
750W |
|
Voltage |
110V |
|
Frequency |
60Hz |
|
oil storage volume of |
7L |
|
outside dimensions |
11.8"*9.4"*15.7" |
|
|
|
| Specification
Should be used first quick connector quick connector sets equippedwith
hydraulic equipment connected. When plugged in, press thepower switch to
operate for some time, in the absence of pressure,the output hydraulic
oil all the work, and the output hydraulic oil withincreasing load all
the work up to 70Mpa, the need to buck their ownsupercharged, press the
solenoid valve switch the pressure back tozero and hydraulic equipment,
hydraulic oil back to the fuel tank.Remove the quick connector sets the
end, unplug the power. |
| Product details
|
|
Structure and working principle
Pump principle: (see oil system diagram)
(Set oil block) devices in the high pressure the output oil line
whereunloading relief valve to maintain the required output pressure
andthe security role. |
 |
|
|
|
The pump can be observed at any time to work when the pressurechanges,
ad hoc pressure gauge, so that users always observe thechanges in the
work. Control switches according to user needs, withmanual switch.
When the pressure is below 7 MPa, the low pressure pump is working and
the flow rate is 5 L /min. When the pressure is above 7 MPa, the high
pressure pump is working
|
 |
Item# |
Description |
QTY |
Unit |
Note |
| 230503 |
DBD750-D1High Pressure Electric
Pump |
1 |
set |
|
|
