|
Features:
Easy to operate
Thorough sterilization
Safety & Convenient
High temperature and pressure
Name of Part
Parameters:
|
Voltage (v) |
110 |
|
Power (kw) |
1.1 |
|
Chamber (mm, diameter/depth) |
Ø230×360 |
|
Sterilization temperature (°C) |
121 °C、134 °C |
|
Overall dimensions (mm) |
560 (width)x315(height)x365(depth) |
|
Net weight (kg) |
28 |
|
Sterilization time |
121 °C |
30 min. |
|
134 °C |
10 min. |
Installation
• Position the device on a plane surface with minimum capacity
60 Kg.
• The
sterilizer should be placed on a level worktable.
• Improper
water level in the chamber could cause a sterilizer malfunction.
• Leave at
least 10 cm between the device rear part and the wall. The
clearance required to open the door is 40cm.
• Position the
autoclave at such a height as to make it possible for the
operator to check the whole sterilization chamber and carry out
the normal cleaning operations.
• The room
where the device is installed must have sufficient ventilation.
• Do not
install the autoclave near washing basins, taps, etc. where it
is likely to be splashed.
• Do not
install the sterilizer nearby a heat source.
• Do not lean
on the door when it is opened.
• Do not place
trays, papers, fluid containers, etc. on the sterilizer.
• Check the
label on back panel of sterilizer to verify voltage rating for
the unit. Failure to connect the autoclave to an appropriate
power supply could result in damage to the unit, and electrical
shock to personnel.
• Plug power
cord into a properly polarized and grounded receptacle rated. A
dedicated circuit only used for the sterilizer is recommended.
|
