|
|
|
|
 |
|
Operation and maintenance |
1) Check whether the power voltage conforms to
that on the designation plate and the power should connect to the
reliable ground wire.
2) Raise ice crushing handle to the upperstop,connest to the
power,hurn on the master switch and place the ice basin on the
underframe with the ice cubes put into the ice crushing
barrel.(Note:Quantity of the ice cubes should not exceed the ice
crushing barrel level).Then press down the ice predding handle to
make the protective switch automatically turned on and crush
ice.After finishing,please raise the ice crashing handle to the
upper stop again and repeat the above mentioned operation process. |
Parameters |
| |
Voltage |
110V |
|
| |
Power |
300w |
|
| |
Crushing weight |
65kg/hour (143.3lbs) |
|
| |
Machine Size |
16.1*8.3*12.2inch |
|
| |
Weight |
4KG
(8.8lbs) |
|
 |
 |
 |
 |
 |
|
 |
|
Keep Clean
After using the ice crushing,the switch
should be turned off.Disconnect the power plug and wipe dry the
body,then place the machine in the dry place. |
|
Cautions
When using the outlet of ice cubes
cannot be jammed or the cutter head may get stuck and the motor be
burnt out.If the above mentioned conditions appear,please find out
the reasons immediately,cut off the power and raise the handle. |
 |
 |
|
Item included |
|
110V Ice Shaver(152280) |
|
