Before Using
1.Put the machine smooth
2. Adjust the roll gap, clockwise to tighten and counterclockwise to loose.Starting from the smallest gap, counterclockwise a circle, roll gap increased by 0.06"(1.5 mm).
3.Wash the machine before use
Note :
1-
Can't adjust the roll gap too tightly .
2-The ground wires should be attached to the machine.
Due to the polishing process, traces are left on the surface of the machine and coated with anti-rust oil. After juicing, the machine needs scientific maintenance. Please refer to the manual.
After juicing, the machine needs scientific maintenance, please refer to the manual.
|
Operation Steps
1.Choose the proper power(110v)
2.Cut a wedge on the sugarcane before put it into the machine
3. Starting the processing
4.After squeezing finished, you should wash the rollers timely, make sure no sticky in juice box and keep it clean.
5.The material of three-roller is not stainless steel .In older to prevent rust please clean after use.
Packing list :
Tray x 1
Strainer x 1
User Manual x 1 |
