|
|
|
Heavy Electric
Round Corner Cutter |
|
|
|
|
|
|
|
The heavy electric round corner
cutter is widely used for cutting round corners of name cards, books,
packaging materials, documents, certificates, bags, notebooks and so on.
It is easy to operate and convenient to use. The user can easily operate
the round corner cutter by himself to cut paper, cards, film, leather
and so on. |
 |
|
Product
Parameters: |
|
Voltage: 110V/60Hz
Cutting radius: R8, R10, R12, R16
and R21 (radius is
8mm, 10mm, 12mm, 16mm and 21mm), (5 kinds of cutting blades, rotate the blade disc to change
the different blades so as to achieve different round corner cutting)
Working frequency: 56
times/min
Power: 550W
Motor speed: 1400RPM
Punching height: 80mm
Platform size:
17.32inX18.90in (44cmX48cm)
Cabinet size:
16.93inX18.70in (43cmX47.5cm)
|
 |
|
Product
Features: |
|
1. The metal protective cover is
designed to protect the user, the user can safely operate the machine
and is kept away from the blades.
2. The pedal is arranged for the
round corner cutter, the user can use the pedal to control the cutting
process, the corner cutting operation is easy, and the round corner
cutter is convenient to use and can be easily operated by one person.
3. Double guide rails operate
perpendicularly and stably, so that cutting is agile and accurate.
4. The blade pad is designed for
protecting the cutting blades, so that the service life of each cutting
blade is prolonged, and the cut round corners are attractive.
5. The metal barriers are
arranged for the machine and are hard and durable, the corner cutting
position can be flexibly adjusted and fixed, and paper can be neatly
placed. 6. The lifting
handles are arranged on the side faces of the machine, so that the round
corner cutter is convenient to lift and move. |
|
The scrap outlet is formed in the
side face of the cabinet, and the cutting scrap can be discharged from
the scrap outlet and can be collected conveniently. |
 |
 |
The user can place different
materials in the cabinet and take the materials from the cabinet, so
that the storage space is effectively utilized, and the efficiency is
effectively improved. |
|
The different cutting blades have
different cutting radii, different round corners can be formed through
the cutting blades, the user has more choices, and the user experience
can be improved. |
 |
 |
The pedal is designed for the
user, the user can control the cutting operation by using the pedal, so
that the cutting process is easier, operation is more convenient, and
the safety is effectively improved. |
|
The metal protective cover is
designed for the user. When the user lifts the protective cover, the
cutting operation stops, and when the protective cover is put down, and
the operation begins again. The safety of the user is effectively
improved, the user is well protected, and the machine can be better
used. |
 |
|
Operation Method: |
1. Place the machine on the flat ground,
and check whether all accessories are available.
2. Lift the protective cover, press the handle on the right side and
rotate the vertical rod to select the appropriate blade at the same
time.
3. Put down the protective cover in place, and push the to-be-cut
materials to lean against the two baffles neatly.
4. Install the power cord on the machine, connect it to the 110V power
supply, turn on the power switch, and turn the control knob to the gear
1.
5. Press the foot switch once, the machine cuts the materials once.
6. After finishing the cutting operation, turn the control knob to the
gear 0, turn off the power switch and unplug the machine.
7. Clean the material residues in the machine away and store the machine
in a dry and ventilated place.
|
|
Attention: |
1. Do not put hands into the machine
during operation. Do not touch the running parts during operation.
2. Do not allow children or unqualified persons to operate or approach
the equipment in the using process.
3. The machine has a function of immediately stopping running when the
cover is opened. After the appropriate blade is selected, the protective
cover must be put down, otherwise the machine will not operate.
4. Be sure to turn off the power before replacing the blades.
5. If the materials are too thick and the blade gets stuck, the operator
can turn the control knob to the gear 2, and the blade can be reset.
|
 |
|
Item Number(120094): 1 X
Heavy Electric Round Corner
Cutter |
|
|
You can make
order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in
normal condition.
Handling Time: Shipping is usually made in 1-3 business days after
payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty
period has expired, you can still seek for service or technical support
from us with low cost. |
|
