Sign in or register

My Asc365

My shopping cart

contact us

Heat Press & Sublimation Transfer> Machines> Flat Heat Press>
110066:Pneumatic Rosin Press 5000psi 6 x 8 Platen Dual Heating
C $900
Out Of Stock

Similar products

110231:110V 15"*15" Drawer Design Automatic Electric Heat Press Machine

110228:Hand design wholesale rosin press machines double heating

110226:Pneumatic Rosin Press 3000LBS 6" x 8" Platen

110227:20 Tons Dual Heating plate Hydraulic Manual Rosin heat press Machine

110201:15x15 Clamshell Heat Press T-shirt Transfer High Pressure Digital Display

新建网页 2

110V Pneumatic Rosin Press 5000psi 6 x 8 Platen Dual Heating 110066


This machine is not suitable for minors to use or food processing.


A heat press machine is the machine that presses a transfer onto an imprintable substrate.
Using high temperatures and pressures for a certain amount of time, the transfer is permanently
embedded into the product.
Heat presses are recommended for professional and satisfying results simply because standard
laminating devices and home hand irons can not get even near the temperatures required for a
reliable transfer.



① Temp/Time gauge

② Emergency-stop button

③ Start device

④ Regulator



Voltage 110V
power 550w
Time Range 0~999s
Printing area 15*20cm (6"*8")
weight 88lbs
package size about 19.69*13.39*23.62 inch
1.The machine was used digital temperature control and owns high accuracy.
2.It owns electronic time control and the signal instructions when it completes the process.
3.It is easy to adjust the pressure.
4.The heating pipe and heating plate is overall and the heating time is short, safe and reliable.
5.The press of the machine is pneumatic, making the operation more efficient and more


1.Turn on power (2)and connect air compressor ,place the material on working table
2.Adjust the pressure with pressure adjust screw ,lift this screw up adjust pressure.
Clockwise for add pressure ,anticlockwise for decrease pressure (advise 0.3-0.6)


3.Set temp&time with temp/time gauge(2)


4.The temp for Heating plate(5) will start to rise up ,when it reaching temp you set ,place the


material on the working table.
5.Press Start device(4) the heating plate(5) will close.
6.The heating plate(5) will lift up automatic when reaching time you set ,then take out the
7.Emergency-stop button when you met any emergency press this button ,machine will turn off

About Us Product Service Shipping Payment Privacy refund Warranty

Copyright All Rights Reserved