|
|
Product Overview
|
MP-3000E Professional
Vertical Vibration Test Bench
(0-400Hz Adjustable
Frequency) |
MP-3000E intelligent vibration testing
machine is used to simulate the various environments encountered
in the manufacturing, assembly, transportation and use of the
execution stage, to identify whether the product is able to
withstand environmental vibration, suitable for the research,
development, quality control and manufacturing of electronics,
mechanical and electrical, optoelectronics, motor vehicles, toys
and other industries.
The test method of the machine is based on the digital control
of random vibration, and the vibration of various environments
is simulated and provided to determine the ability of the test
sample to withstand the specified broadband random vibration. |
| Voltage: |
110V/60Hz |
| Power: |
1.2KW |
| Rated test
load weight: |
66lbs(30kg) |
| Vibration
frequency range: |
1~400hz
(Fixed frequency or sweep frequency can be set arbitrarily) |
| No load
vibration amplitude: |
P～P/3mm |
| Vibration
direction: |
Vertical/(Y) |
| Service
environment: |
0-40℃ RH＜80% |
| Working
table size: |
15.5"*14.2"(39.5CM*36CM) |
|
Product size: |
18.7"*15.7"*11.2"(47.5CM*40CM*28.5CM) |
|
Package size: |
20"*19"*14.6"(50CM*48CM*37CM) |
|
Net weight/Gross weight: |
77lbs(35kg)/86lbs(39kg) |
| 20 different
vibration parameters can be set, the test time can be set
arbitrarily (0~999 minutes), the number of cycles can be set
arbitrarily (1~200 times), and the number of tests can be added
up. |
| Product Features & Advantages |
 |
1. Intelligent control :
Built-in overload protection fuse,
and equipped with high-performance chip, read data more
accurately. The microcomputer protection circuit is adopted to
overcome the defect that the ordinary machine is burned by the
impulse voltage when starting up, and the use is more convenient
and reliable. |
| 2. Power off automatic
memory : Automatic
setting, simple operation, the use of advanced microcomputer
control circuit, you can permanently memory set parameters,
power will not lose data; At the same time, the number of
vibration program segments and the number of program cycles can
be set. When the machine completes the vibration test stop or
the machine is shut down and powered off, the machine will
automatically remember the current vibration data and
automatically reset. |
 |
 |
3. Thermal design :
The body has a heat dissipation
window, timely heat dissipation, discharge the excess heat
inside the machine, to ensure the long-term stable operation of
the machine. |
| 4. Adjustable amplitude :
Through the amplitude adjustment
knob, the amplitude can be adjusted at any time according to the
demand, simple and convenient operation. |
 |
 |
5. Non-slip and waterproof
: Rubber support pad
at the bottom, anti-slip and wear-resistant, play a good
cushioning role; At the same time, the bottom of the machine can
be isolated from the desktop to prevent the machine from water. |
| 6. Handle design :
There are handles on both sides to
facilitate the handling and moving of the machine, and the
machine can be moved to the place where it needs to work at any
time, saving worry and effort and making it safer. |
 |
 |
Operation
Procedure
※ Place the tested product
in the center of the operating table and fix it reliably on
the table, otherwise the vibration force is unbalanced,
affecting the test effect!
※ Before starting, be sure
to turn the amplitude knob counterclockwise to the minimum
(Min), and adjust it to the required amplitude according to
the test requirements of the product under test after
starting. No load can be greater than 3mm(i.e. ±1.5mm).
Otherwise, the performance of the machine will be affected
and the noise will increase accordingly.
※ After setting the test
parameters, press [Start] button to start the machine
to work.
※ If the vibration needs to
be paused in the middle of the test run, press [pause]
to pause and press again to resume the vibration.
※ In the stopped state:
press the [Start] key for 2 seconds to start
vibration; Press the [Stop] key to terminate the vibration.
※ Turn on the timing
function, the test will automatically stop when it reaches
the preset time, and the interface will display "test
complete" and sound prompt. Press the [Confirm] key
or automatically close the prompt sound after 5 seconds and
return to the initial operation setting interface.
Note: Due to the weight of the device, it is recommended
to keep the original packing case for easy handling.
|
 |
| Product Presentation & Details |
![]()
Item Included(056841) |
| MP-3000E Intelligent Vibration Testing
Machine *1 |
|
You can
make order with no worry.
Any concern just feel free to let us know, we'll reply in 24
hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days
after payments cleared. Orders are processed from Monday-Friday;
Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the
consumables.
We stand behind our products all the item, so even if your
warranty period has expired, you can still seek for service or
technical support from us with low cost. |
|
