|
|
Product Overview
220V Hydraulic Arc Punching Machine/Half
Hole/Full Hole(Molds can be customized)
 |
| This equipment is a special equipment
for forming and punching stainless steel square pipe, zinc steel
square pipe and iron square pipe. The mold of this equipment can
be
customized, adjusted, and disassembled, quick and easy to
use. The components have reasonable layout, compact structure,
easy operation, safety and reliability, and have the
characteristics of high production efficiency, accurate
positioning and high processing precision. |
| Voltage: |
220V |
| Power: |
2.2kW |
| Phase
number: |
1 |
| Tank
capacity: |
about 4.8gal(18L) |
| Stamping
tonnage: |
3ton |
| The outer
diameter of the applicable pipe: |
0.98"(25mm)
|
| Thickness of
pipe: |
≤0.5mm(0.02")[For pipes with a thickness
of more than 0.5mm, please inform us of the thickness and
material of the pipe before purchasing!!!] |
| Package size: |
23.6"*20.5"*52" (60cm*52cm*132cm) |
| Net weight/Gross weight: |
209.4lbs(95kg)/264.6lbs(120kg) |
1. The wall thickness of the punch arc may vary (depending on
the material), please be sure to consult the wall thickness and
material of the pipe before purchase!
2. The default function of the machine is only arc punching. The two
functions of punching and cutting can also be achieved,
requiring custom molds. (The standard mold is for arc punching). |
| Product Features & Advantages |
 |
a.
Oil Cylinder
The perforated oil
cylinder, also known as the hydraulic cylinder, is a
device that converts the energy of the hydraulic system
into mechanical power, which can provide stable and
reliable power support.
|
b.
Precise Arc
Arc punching process by
designing the proportion of arc cutting mouth, and using
the machine to cut the welding point of the steel pipe
into an arc, so as to achieve 360 degrees without dead
Angle welding, making the finished product frame after
welding more stable and firm. Our machine is fast and
stable, which greatly improves the production
efficiency.
|
 |
 |
c.
Control Panel
Intelligent integrated design of control panel, which allows
customers to operate the machine according to their needs,
making it more convenient and efficient. Punching/Arc
Punching/Half Hole/Full Hole/Manual/Auto/ one-click switch,
simple and convenient operation. The fault alarm indicator
light making the operation safer and more reliable.
|
d.
Pure Copper Motor
Adopts pure copper core motor, strong power, high
efficiency; Simple structure, can work stably for a long
time, high reliability, low maintenance cost.
|
 |
 |
e.
Working Principle
Motor electric pump oil - Through the solenoid valve to
control the direction of hydraulic oil - Open the
high-pressure oil valve - Hydraulic pressure into the
cylinder to make the cylinder to produce up and down action
- Cylinder connected to the punch for punching.
|
f.
Induction System
Top, middle and bottom three sensors support full hole/half hole, induction stop, easy to use.
Please note: All induction can not be more than 5mm away
from the screw(see image beside), otherwise after the
machine cylinder come down will not go up or can not move, or the
machine will not respond. (Each sensor lights up as this
screw passes through, When the machine is in half hole
state, the screw will stop at the induction position of the
middle point. When the machine is in full hole state, the
screw will stop when it reaches the lowest sensing
position.)
|
 |
 |
g.
Foot Switch
The machine is equipped with a movable foot switch to
control the arc punching, freeing the hands, which can
greatly improve the work efficiency and save worry and
effort.
|
h.
Range of Application
Widely used, such as stairs, shelves, protective railings,
anti-theft nets, sports building materials and so on.
|
 |
 |
i.
Extensive Application
Suitable for stainless steel pipe, channel steel pipe,
aluminum pipe, plastic pipe, copper pipe and rectangular
steel pipe. (Additional custom molds
are required to achieve the above effect.)
|
|
1.
Put the tube in the middle die and push it to the rear position.
The rear positioning function is to control the position of the
first hole when machining the workpiece.
2.
After adjusting and positioning, prepare for punching.
3.
Power on - Switch to Automatic - Full hole.
4.
Open the high pressure oil valve that needs to punch the
cylinder and step the foot switch to punch the hole.
5.
Pull out the tube to adjust the hole distance positioning, (the
former positioning is adjusted for the required size of the
workpiece processing) the high pressure oil valve should be
turned off before shutdown. (prevent no-load phenomenon) note:
the mold can not run when there is no pipe in. |
|
1.
Equipment used in the built-in electric motor should prevent
rainwater into the electric box and hydraulic station. It is
strictly prohibited to store with flammable materials, and it is
strictly prohibited to squeeze and impact the machine.
2. It is forbidden for the mold to be squeezed by heavy objects
under good debugging condition.
3. Under normal use, the mold requires frequent lubrication with
oil.
4. High-pressure oil hose must not be torn.
5. Do not run the machine without putting the tube into the
mold.
6. The power supply of the main gate should be turned off after
the equipment is used.
7. After the mold is adjusted, the pipe can be put into the mold
for punching, the punching needle of the punching mold must be
adjusted smoothly, the mold can not be empty punching, there
must be materials in it, and the mold can be turned on to punch
the mold.
8. Do not open the electric box for adjustment when the machine
is working. Must stop the machine to adjust the equipment, pay
attention to your safety.
9. Do not loosen the high pressure tubing in the startup state.
10. Do not touch the mold with your hands in working condition.
11. If the mold has abnormal sound, stop the machine for
inspection.
12. Do not swing the tail of the mold in working condition. |
|
|
|
1.
Clean the circuit part of the dust so as not to cause poor
contact regularly.
2. Clean the surface of the machine debris, dust in time, to
prevent the machine rust, to extend its service life.
3. Strictly prohibit wet hand operation of electrical switches
to prevent electric shock.
4. Any malfunction or error in the equipment must be checked and
eliminated immediately.
5. Do not wear necklaces, bracelets, watches, rings, etc. during
equipment maintenance to avoid accidents.
6. Replace damaged machine parts in a timely manner. |
| Product Presentation & Details |
|
Hydraulic Arc Punching Machine *1 |
|
You can
make order with no worry.
Any concern just feel free to let us know, we'll reply in 24
hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days
after payments cleared. Orders are processed from Monday-Friday;
Not on the weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the
consumables.
We stand behind our products all the item, so even if your
warranty period has expired, you can still seek for service or
technical support from us with low cost. |
|
