|
|
新建网页 2
新建网页 1
新建网页 1
|
110V Dental Lab Agar
Mixer Hydrocolloid Duplicating Machine |
| Duplicating Machine is used for melting and
mixing duplicating gel in prosthetic dentistry. It is a necessary
equipment for duplicating molds. The mixing tank of the machine is made
of stainless steel, which is corrosion resistant, and the property of
the Duplicating Gel will not be changed. This is an economic machine
which can melt and heat very quickly. The machine can heat, mix, cool
down automatically. All operations can be done by pressing the buttons. |
| Voltage: |
AC110V/60Hz |
| Mixing speed: |
28rpm |
| Heating coil power: |
800W |
| Motor power: |
450W |
| Working cycle time: |
1 to 2 hours |
| Agar mixing amount: |
4.4lb-11.0lb(2kg-5kg) |
| Package size: |
23.0"*16.5"*16.9"(43cm*42cm*58.5cm) |
| Product size: |
12.6"*11.0"*18.9"(32cm*28cm*48cm) |
| Gross weight: |
52.9lb(24kg) |
|
Precautions for use: press the heat preservation button after the
temperature reaches the predetermined temperature and the agar is
completely melted!!! |
| Product Features & Advantages |
- The machine adopts a resistance wire attached
to the outside of the pot and a heating strip, which can be heated
evenly.
- Use stainless steel inner pot, stir evenly in the pot to avoid local
high temperature.
- Digital thermostat with upper and lower temperature is adopted, and
can be thawed at low temperature.
- AGAR can be cast at the temperature near the solidification critical
point to obtain accurate casting.
- Fast heating, easy to use, easy to operate, good quality and long
life. |
| Product Presentation & Details |
| Mixer *1(with English instruction) |
The power cord *1 |
|
