Attention

1.The  change of static grinding wheel: the change is appropriate if the machine cover  is removed, and three cap nuts on grinding wheel base are unscrewed and the bolt  is taken out. (Notice: three nuts should be tightened in turn with proper  tension, in case of damaging the grinding wheel and automatic removal of the  nut.)

2.  The change of dynamic grinding wheel: the change is appropriate if the  tightening bolt is unscrewed, and the kicking-out device is removed firstly and  then the dynamic grinding wheel is removed. The location bolt must be embedded  into the small round hole on the back of dynamic grinding wheel correctly when  the dynamic grinding wheel is being installed.

3.  The leveling of the grinding wheel: the parallel status between dynamic and  static grinding wheels is the key to guarantee that this model is stable,  endurable and highly efficient, which must not be negligent. The leveling must  be completed after the change of the grinding wheel.

• Voltage:110V/60HZ
• Weight:35lbs
• Power:750w
• Throughput:55lbs/h
• Material: Stainless steel
• Wheels diameters: 80mm

1 machine plug, adjust the grinding  wheel. Method: turn the compass, turn right, hear the rustle, stop  spinning.
2 add water, with plastic pipes connected to tap water, water is not too  large, open to the minimum, so that water evenly into the funnel.
3 add soybean, soak in summer for 8 hours, soak for about 12 hours in  winter, slowly pour into soybean.

Item  included:

110V Tofu machine   (020137)