|
Special note:
Lithium, rechargeable
hand drill can not be installed.
The machine does not
include a hand drill.
This product can be used for the diameter
of 80mm, length of 600mm within a variety of round pipe, round rod.
Remove thorns from the edge of the head, remove rust, stretching and
polishing from chamferes, tubes and rods. |
| 1:The speed governor can adjust the
rotation speed of the electric drill, need to equip the electric drill
by oneself, this product does not include the electric drill. Fixed
fixture with locking handle.
2:Especially suitable for shorter length (less than 600mm) , suitable
for the traditional grinder, Angle Grinder to the head of the Burr is
difficult to be removed in the standard chamfer, and the rust removal,
wire drawing and polishing of the round pipe and the round rod, etc. .
3:This product is equipped with abrasive
lifting platform, sandpaper mounting plate, bearing sliding track, can
be adjusted according to their own needs.
4:Both sides of the fixture can be moved
about 30cm, can be adjusted according to the length of the workpiece.
The hand drill can be installed on both sides of the machine.
Special note:
This machine is not a
machine tool products, can not be used as finishing equipment, the
installation of the need to process the pipe concentric degree can not
be the same as the machine, there will be a certain deviation. |
